use a tiny helper module to unify output

README.md

@@ -4,6 +4,9 @@ This shows how to build the same config, with and without flakes.
 
 It also shows that `flake.nix` is basically just some syntax.
 
+You can run `./check.sh` to show that this builds the same system config
+with/without flakes.
+
 ## flake fundamentals
 
 Nix is in flakes mode when:
@@ -34,40 +37,33 @@ These three examples, for me, are all the same source, but accessed in different
 
 ## overview
 
-Note that these produce the same output:
+The `./check.sh` script proves they give the same exact system toplevel outputs:
 
-1. with flakes:
+```console
+cole@slynux ~/code/nixos-flake-example master* 7s
+❯ ./check.sh     
 
-    ```shell
+:: Updating the 'nixpkgs' input in flake.nix
-    nix build '.#nixosConfigurations.mysystem.config.system.build.toplevel'
++ nix flake update --update-input nixpkgs
-    readlink -f result
++ set +x
-    /nix/store/0imi716z1qd04pfh4zdw6mb0gnxmakjs-nixos-system-nixos-21.03.20201020.007126e
 
-    nixos-rebuild build --flake '.#mysystem'
+:: Using 'nixos-rebuild' to build the 'mysystem' toplevel
-    readlink -f result
++ nixos-rebuild build --flake .#mysystem
-    /nix/store/0imi716z1qd04pfh4zdw6mb0gnxmakjs-nixos-system-nixos-21.03.20201020.007126e
+warning: Git tree '/home/cole/code/nixos-flake-example' is dirty
-    ```
+building the system configuration...
+warning: Git tree '/home/cole/code/nixos-flake-example' is dirty
++ set +x
 
-    Note, nixos-rebuild is basically just some magic to build the right derivation
+:: Using rev=007126eef72271480cb7670e19e501a1ad2c1ff2 for <nixpkgs> (extracted from flake.nix)
-    and then set it as a system profile, and activate it.
 
-2. without flakes:
+:: Setting NIX_PATH to the same values flakes is using
++ NIX_PATH=nixpkgs=https://github.com/nixos/nixpkgs/archive/007126eef72271480cb7670e19e501a1ad2c1ff2.tar.gz:nixos-config=/home/cole/code/nixos-flake-example/configuration.nix
++ nix-build '<nixpkgs/nixos>' -A config.system.build.toplevel
+/nix/store/gg1jhmzqndqa0rfnwfdbnzrn8f74ckr6-nixos-system-mysystem-21.03pre-git
++ set +x
 
-    ```shell
+flake: /nix/store/gg1jhmzqndqa0rfnwfdbnzrn8f74ckr6-nixos-system-mysystem-21.03pre-git
-    export NIX_PATH=nixos-config=$(pwd)/configuration.nix:nixpkgs=https://github.com/nixos/nixpkgs/archive/nixos-unstable.tar.gz
+clssc: /nix/store/gg1jhmzqndqa0rfnwfdbnzrn8f74ckr6-nixos-system-mysystem-21.03pre-git
 
-
+```
-    /nix/store/zidq625i13hvbbs8alkklj8k6a191xix-nixos-system-nixos-21.03pre-git
-    ```
-
-    **Note**, ~~same path~~ same inner system, just much slower due to no eval cache.
-    (they should be identical, but the flake version suffix is slightly different)
-
-They build the same thing, the flake.nix just moves the redirection from the NixOS channel system
-into the flake instead.
-
-Note, if you come back and run this later, you may need to tell nix to update the `nixpkgs` that it
-has pinned in `flake.lock` by running `nix flake update --update-input nixpkgs`. The non-flake example
-is going to re-download the nixos-unstable build when the cache expires. This could cause any hash differences
-if they're on different revs. (again, another reason to have control of it via flakes, and can lock it directly in the source.)
 

check.sh

@@ -0,0 +1,46 @@
+#!/usr/bin/env bash
+set -euo pipefail
+
+rm -f result
+unset NIX_PATH
+
+echo
+echo ":: Updating the 'nixpkgs' input in flake.nix"; set -x
+nix flake update --update-input nixpkgs &>/dev/null
+set +x
+
+echo
+echo ":: Using 'nixos-rebuild' to build the 'mysystem' toplevel"; set -x
+nixos-rebuild build --flake '.#mysystem'
+set +x
+flake_path="$(readlink -f ./result)"
+
+# extract rev from flake.lock so we can figure out the nixpkgs rev used
+rev="$(cat flake.lock| jq -r '.nodes.nixpkgs.locked.rev')"
+echo
+echo ":: Using rev=${rev} for <nixpkgs> (extracted from flake.nix)"; set +x
+
+
+rm -f result
+nixpkgs="https://github.com/nixos/nixpkgs/archive/${rev}.tar.gz"
+nixosconfig="$(pwd)/configuration.nix"
+
+echo
+echo ":: Setting NIX_PATH to the same values flakes is using"; set -x
+NIX_PATH="nixpkgs=${nixpkgs}:nixos-config=${nixosconfig}" \
+  nix-build '<nixpkgs/nixos>' -A config.system.build.toplevel
+set +x
+
+#  nixos-rebuild build
+
+classic_path="$(readlink -f ./result)"
+
+set +x
+echo
+echo "flake: ${flake_path}"
+echo "clssc: ${classic_path}"
+
+if [[ "${flake_path}" != "${classic_path}" ]]; then
+  exit -1
+fi
+

configuration.nix

@@ -15,7 +15,6 @@
 
   services.sshd.enable = true;
 
-  # etc
+  networking.hostName = "mysystem";
-
 }
 

flake.nix

@@ -1,14 +1,22 @@
+
 {
   description = "An example NixOS configuration";
 
-  inputs.nixpkgs = { url = "github:nixos/nixpkgs/nixos-unstable"; };
+  inputs = {
+    nixpkgs = { url = "github:nixos/nixpkgs/nixos-unstable"; };
+  };
 
-  outputs = { self, nixpkgs }: {
+  outputs = inputs:
+    /* ignore:: */ let ignoreme = ({config,lib,...}: with lib; { system.nixos.revision = mkForce null; system.nixos.versionSuffix = mkForce "pre-git"; }); in
+  {
     nixosConfigurations = {
-      mysystem = nixpkgs.lib.nixosSystem {
+
+      mysystem = inputs.nixpkgs.lib.nixosSystem {
         system = "x86_64-linux";
         modules = [
           (import ./configuration.nix)
+
+          /* ignore */ ignoreme # ignore this; don't include it; it is a small helper for this example
        ];
       };
     };

nixos-config.nix

@@ -0,0 +1 @@
+(builtins.getFlake (toString ./.)).nixosConfigurations.mysystem

result

@@ -0,0 +1 @@
+/nix/store/gg1jhmzqndqa0rfnwfdbnzrn8f74ckr6-nixos-system-mysystem-21.03pre-git